SSBS (Sprint) Pvt Ltd
FOR ENQUIRY @ call us 7828550882 / 7672071548
Metering Skid Filtration Systems
We also offer a wide range of SSBS (Sprint) gas filtration systems for the removal of dirt, dust, rust, condensates, moisture contents, oil impurities & exhaust fumes. Filtered gas results in lower down-time & reduces the production loss. These filtration systems are designed as per the flow requirement, line size, working pressure, working temperature & level of filtration rating.
Product Benefit
High flow rate.
Low pressure drop due to pleated configuration.
High efficiency due to surface filtration.
Reduction in downtime & maintenance.
Easy to install & remove.
Choice of filter media & filter housings.
- High dirt holding capacity.
- Zero hold up design.
- Permanently piped housing is opened without special tools and disturbance of the piping.
- Machined cover gasket groove provide positive O-Ring sealing
- Easy to clean.
- In-line inlet and outlet high flow rates withpositive sealing arrangement to avoid bypassing.
- Suitable for double open end (DOE), Code 7 (226 O’-Ring) & 222 O’-Ring type filter cartridge.
- Accommodates 10″, 20″, 30″, 40″, 50” & 60” long filter cartridges.
- End connections for ¾” to 24″ pipe.
- V posts or threaded center posts.
- Quick opening tri clovers design.
- Easy to operate & low maintenance
- Low down time.
- Flow rate up to 2000 m3/hr & More.
- Customized design available.
- Housings are permanently piped.
- All housings made from SS 316 L, SS 316 & SS304 are mirror polished & electro polished to resist adhesion of dirt and scale..
- Carbon steel housings are sand blasted, epoxy coated & finally painted with two coats of synthetic enamel.
- ASME code stamp available.
- Duplex / Triplex / Jacketed cartridge filter unit designs are available.
- High temperature & high pressure design are available.
- Sanitary fittings and construction
- Higher pressure rating
- Housings of alloy steel
- Steam jackets
- Special outlet locations
- Optional cartridge sealing methods for 226, NPT, etc
- High temperature gasket designs
Sizes (Cartridge filter housings suitable for)
- 1 No. To 500 Nos. Of Cartridges in Single Housing.
- 2” , 2.5” , 4” , 6” & 8” Diameter of Cartridge.
- 10” , 20” , 30” , 40” , 50” & 60” Length of Filter cartridge.
Flow Rate
- Capacity: Up to 2000 m3 /hr & more.
Material of construction
- SS 316L
- SS 316
- SS 304
- Super Duplex,Duplex Stainless steel 2205.
- CARBON STEEL (ALL GRADE).
- MILD STEEL.
- ALLOY METALS.
- POLYPROPYLENE.
- LEAD LINING on Any Metal.
- RUBBER LINING on Any Metal.
- PTFE LINING on Any Metal.
- PTFE coating on any metal.
Cartridge filter housing suitable for filter cartridges of
- Double Open End (DOE) Type.
- Code 7 (226 O’ Ring) Design.
- Code 3 (222 O’ Ring) Design.
- NPT Threaded Connection Type.
Gasket / O Ring Material
- Neoprene
- Nitrile
- Silicone
- Viton
- Buna N
- EPDM
- PTFE
- Spiral Wound
- CAF
End connections available
- NPT / BSP Threaded
- Flanged Table E / Table F
- ANSI B 16.5 Flanged
- DIN Standard
- Tri Clover Adaptors
- SMS /Dairy End Connection
2
FCIMCF-S1-M-203-1-D
| FCI | Description | Style | Material | Size | Configuration | Design |
|---|---|---|---|---|---|---|
| SCF – Single Cartrdige Filter Housing | S1 – Style -1 | A-SS 304 | 203 – 20″ x 3 Nos. Of Ø 2.5″ | 1 – DOE | Duplex | |
| MCF – Multiple Cartrdige Filter Housing | S2 – Style -2 | B-SS 316 | 204 – 20″ x 4 Nos. Of Ø 2.5″ | 2 – SOE | Simplex | |
| S3 – Style -3 | C-SS 316 L | 304 – 20″ x 4 Nos. Of Ø 2.5″ | ||||
| D-CARBON STEEL | 404 – 20″ x 4 Nos. Of Ø 2.5″ | |||||
| E-CSRL | ||||||
| F-ASTM A 106 | ||||||
| G-ASTM A 517 | ||||||
| H-ASTM A 516 |