SSBS (Sprint) Pvt Ltd
FOR ENQUIRY @ call us 7828550882 / 7672071548
Water Absorbent Bags
Water absorbent bags are specifically designed for removal of water from various applications. They can be used to remove water and moisture content from hydrocarbons also up to a certain extent. We have experienced that water absorbent bags are quite useful to remove small amount of water droplets and moisture from finished level of hydrocarbons. They have been made with selective fiber media to capture water droplets and like normal felt bags they are fused for high strength and better durability. Polypropylene collars are installed on top as standard design.
- High dirt holding capacity.
- Zero hold up design.
- Permanently piped housing is opened without special tools and disturbance of the piping.
- Machined cover gasket groove provide positive O-Ring sealing
- Easy to clean.
- In-line inlet and outlet high flow rates withpositive sealing arrangement to avoid bypassing.
- Suitable for double open end (DOE), Code 7 (226 O’-Ring) & 222 O’-Ring type filter cartridge.
- Accommodates 10″, 20″, 30″, 40″, 50” & 60” long filter cartridges.
- End connections for ¾” to 24″ pipe.
- V posts or threaded center posts.
- Quick opening tri clovers design.
- Easy to operate & low maintenance
- Low down time.
- Flow rate up to 2000 m3/hr & More.
- Customized design available.
- Housings are permanently piped.
- All housings made from SS 316 L, SS 316 & SS304 are mirror polished & electro polished to resist adhesion of dirt and scale..
- Carbon steel housings are sand blasted, epoxy coated & finally painted with two coats of synthetic enamel.
- ASME code stamp available.
- Duplex / Triplex / Jacketed cartridge filter unit designs are available.
- High temperature & high pressure design are available.
- Sanitary fittings and construction
- Higher pressure rating
- Housings of alloy steel
- Steam jackets
- Special outlet locations
- Optional cartridge sealing methods for 226, NPT, etc
- High temperature gasket designs
Sizes (Cartridge filter housings suitable for)
- 1 No. To 500 Nos. Of Cartridges in Single Housing.
- 2” , 2.5” , 4” , 6” & 8” Diameter of Cartridge.
- 10” , 20” , 30” , 40” , 50” & 60” Length of Filter cartridge.
Flow Rate
- Capacity: Up to 2000 m3 /hr & more.
Material of construction
- SS 316L
- SS 316
- SS 304
- Super Duplex,Duplex Stainless steel 2205.
- CARBON STEEL (ALL GRADE).
- MILD STEEL.
- ALLOY METALS.
- POLYPROPYLENE.
- LEAD LINING on Any Metal.
- RUBBER LINING on Any Metal.
- PTFE LINING on Any Metal.
- PTFE coating on any metal.
Cartridge filter housing suitable for filter cartridges of
- Double Open End (DOE) Type.
- Code 7 (226 O’ Ring) Design.
- Code 3 (222 O’ Ring) Design.
- NPT Threaded Connection Type.
Gasket / O Ring Material
- Neoprene
- Nitrile
- Silicone
- Viton
- Buna N
- EPDM
- PTFE
- Spiral Wound
- CAF
End connections available
- NPT / BSP Threaded
- Flanged Table E / Table F
- ANSI B 16.5 Flanged
- DIN Standard
- Tri Clover Adaptors
- SMS /Dairy End Connection
2
FCIMCF-S1-M-203-1-D
| FCI | Description | Style | Material | Size | Configuration | Design |
|---|---|---|---|---|---|---|
| SCF – Single Cartrdige Filter Housing | S1 – Style -1 | A-SS 304 | 203 – 20″ x 3 Nos. Of Ø 2.5″ | 1 – DOE | Duplex | |
| MCF – Multiple Cartrdige Filter Housing | S2 – Style -2 | B-SS 316 | 204 – 20″ x 4 Nos. Of Ø 2.5″ | 2 – SOE | Simplex | |
| S3 – Style -3 | C-SS 316 L | 304 – 20″ x 4 Nos. Of Ø 2.5″ | ||||
| D-CARBON STEEL | 404 – 20″ x 4 Nos. Of Ø 2.5″ | |||||
| E-CSRL | ||||||
| F-ASTM A 106 | ||||||
| G-ASTM A 517 | ||||||
| H-ASTM A 516 |